NRI G-13.mft - User Manual

Technical documentation
National Rejectors, Inc. GmbH • Zum Fruchthof 6 • D-21614 Buxtehude
Phone: +49 (0)4161-729-0 • Fax: +49 (0)4161-729-115 • e-mail: info@nri.de • Internet: www.nri.de
CRANE
11.03 Wis/ds
Edition 1.1
BA.G13MFTEMPMDB-GB
Electronic Coin Validator
G-13.mft (ECV and MDB model)
Operating instructions

Summary

Introduction

Model Variants

Details the available ECV and MDB models, and entry types.

Safety Instructions

Construction

Switching Block Configuration

Interface Connections

Covers various interfaces for machine, sorting, and programming.

Functionality

Measuring and Acceptance Principle

Details how coins are measured and validated against acceptance bands.

Coin Channel Management

Accepted Coin Sensor Function

Coin Impulses and Signal Lines

External Sorting Control

Inhibiting Coin Types

Describes methods for preventing specific coin types from being accepted.

Starting Up and Installation

Machine Installation

Steps for installing the coin validator into a vending machine.

PC Configuration Setup

Palm Handheld Configuration

Operation and Control

Inhibiting Coin Channels

Describes using DIL switches to inhibit specific coin channels.

Coin Teaching Mode

Software Configuration Functions

ECV Model Functions

MDB Model Functions

Technical Specifications

ECV Model Pinout

Details pin assignments and connection diagram for the ECV model.

MDB Model Pinout

Details pin assignments and connection diagram for the MDB model.

NRI G-13.mft Specifications

General

Brand	NRI
Model	G-13.mft
Category	Cash Counters & Coin Sorters
Language	English