NSK SGS Series - Post-Use Maintenance

11
EN FR
9-1 Cleaning at point-of use
CAUTION
• Do not use the following liquids to wipe, immerse, or clean the product:
strong / super acid water, strong acid / alkaline chemicals, chlorine-containing solutions, solvents such as benzine or thinner.
• Do not immerse NSK instruments in disinfectant solution or clean in ultrasonic devices.
WARNING
•Toensurecleaningandsterilizationefficacy,useonlythefollowingproceduresforreprocessing.
•Followanyadditionallocaldirectives,standards,andguidelinesforcleaning,disinfection,andsterilization.
•Clean,disinfect,lubricateandsterilizethehandpieceimmediately(within1hour)aftereachtreatmenttoremoveresidue.Failuretoproperlymaintain
thehandpiecemaycauseinfection,productfailure,overheatingleadingtoburninjuries.
9. Post-use Maintenance
Post-use maintenance includes cleaning, lubricating, and sterilization after each patient use.
SGS.SGA_EN_180111.indd 11 2018/01/12 19:07:15