Caution
• Avoid impact on the handpiece. Do not drop the handpiece.
• Do not operate the handpiece without first inserting a bur or test-bur into the chuck.
• Remove the bur only after the handpiece has completely stopped rotating.
• Do not look into LED light directly.
• When abnormalities are in LED (dark, do not light on or flashing or so), contact dealer to repair.
(X500WLED/X500BLED/M600WLED/M600BLED/X700WLED/X700BLED)
• This product is classified as Class 1 LED Product. (X500WLED/X500BLED/X600WLED/X600BLED/X700WLED/X700BLED)
• Use a power source which meets the following requirements.
(X500WLED/X500BLED/X600WLED/X600BLED/X700WLED/X700BLED)
1.The electricity supply of the power source is below 15W both under normal and single failure conditions.
2.The power source uses a SELV circuit for electricity supply.
3.The output voltage of the power source is within the range recommended by the manufacturer of this product.
2
To Next Page
Loading...
Need help?
General
