NSK Surgic Pro Series User Manual

Details the equipment classification, protection, and operational modes.

Explains warning symbols and general safety instructions for operation.

Itemizes all components included in the Surgic Pro system package.

Details the function of each key on the control unit console.

Explains the various indicators and information shown on the control unit's LCD screen.

Explains the operation of the foot control buttons and pedal.

Instructions for connecting the motor cord to the control unit.

Steps for attaching the handpiece to the micromotor.

How to connect the foot control to the main unit.

Instructions for connecting the AC power cord.

Guide for properly installing the irrigation tube.

How to attach the coolant solution hanger post.

Steps for inserting the irrigation tube into the system.

Checking compatibility for internal spray nozzles with drills.

Information on attaching irrigation nozzles.

How to attach the tube holder.

Connecting a USB flash drive to the control unit.

Instructions for setting the system's clock and date.

How to adjust the illumination level for the handpiece.

How to change the volume for sounds and warnings.

Procedure to restore the device to its original factory settings.

How to program and store up to 8 different operational programs.

Details on programming different implant systems.

Function to automatically recognize handpiece and motor resistance.

Steps to prepare for handpiece and motor calibration.

Procedure for performing no-load and load calibration.

How to use the system for standard operations like using barrier films.

How to use the USB flash drive for data storage and retrieval.

Managing data stored in internal memory and transferring it.

How to reset the protection circuit after overload.

Table listing error codes, causes, and remedies for operational issues.

Troubleshooting errors related to USB flash drive functionality.

How to access the fuse box and fuse ratings for replacement.

Procedures for preparing and cleaning the motor.

Step-by-step guide for manual cleaning of components.

Information on using automatic cleaning/disinfection methods.

Detailed conditions for using a thermo-disinfector.

How to replace O-rings for proper function.

Guidelines for packaging, steam sterilization, and drying of components.

Lists handpieces compatible for accurate torque measurement.

Technical specifications for the control unit.

Technical specifications for the micromotor.

Technical specifications for the foot control.

Advice on consulting dealers for proper waste disposal.

Defines various symbols used in the manual and on the equipment.

Information on electromagnetic emissions and guidance for use.

Guidance on electromagnetic immunity requirements for the environment.