English
◆
Indications for use
Indications for use
Safety precautions prior to use
Package Contents
Control Unit and Foot Control
Installation
Setting
Operation
Protection Circuit
Error Code & Troubleshooting
Fuse Replacement
Maintenance (Cleaning)
Sterilization
Contra Angle Handpieces and Accessories
Specification
Disposing Product
Symbols
EMC Information (Electromagnetic Compatibility Information)
Warranty
Contents
◆
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
1
2
4
5
7
10
12
16
16
18
19
22
23
23
23
24
25
27
◆
Classification of equipment
• Type of protection against electric shock :
– Class l equipment
• Degree of protection against electric shock :
– Type BF applied part
• Method of Maintenance (Cleaning) and Sterilization recommended by the manufacturer :
– See 10. Maintenance (Cleaning) and 11. Sterilization
• Degree of protection against ingress of water as detailed in IEC 60529 :
– Foot Control: IPX8 (Protected against the effects of continuous immersion in water)
• Degree of safety of application in the presence of a flammable anesthetic mixture with air or with oxygen or nitrous
oxide :
– Foot Control: Category AP Equipment
• Mode of operation :
– Intermittent operation
Thank you for purchasing the NSK Surgic Pro series Surgery System.
Prior to use, you carefully read this document regarding instructions for use, handling method, or maintenance check so
that you can carry on using system in the future. In addition, keep this operation manual in a place where a user can refer
to it at any given time.
The Surgic Pro
+
/ Surgic Pro is intended for use in dental oral surgery and dental implant.
The main unit is designed to be used with a specific dental micromotor that drives dental handpieces fitted with
appropriate tools to cut hard tissues in the mouth.
English
1
To Next Page
Loading...
