NSK Surgic Pro Series - Compatible Handpieces and Accessories; Compatible Handpiece Models List; System Specifications; Control Unit Technical Specifications

English
12. Contra Angle Handpieces and Accessories
13. Specification
Listed below are the contra angle handpieces which should be used with the Surgic Pro micromotor to guarantee torque
accuracy.
Order Code Model Remarks
C1003 X-SG20L Optic surgial handpiece. 20:1
C1010 SG20 Non-optic surgial handpiece. 20:1
Order Code Model Remarks
C823752 Y-Connector Used for branching the internal and external coolant irrigation.
Y900113 Irrigation tube For replacement tube use. (Pack of 5)
20000396 Nozzle Holder For X-SG20L. Supplied as standard accessory.
20000357 Nozzle Holder For SG20. Supplied as standard accessory.
10000324 Internal Spray Nozzle Supplied as standard accessory.
Y900083 Tube Holder Supplied as standard accessory. (Pack of 7)
Z182600 PANA SPRAY Plus For High & Low speed handpieces.
D0312074080 O-Ring For Micromotor
10001595 Protection Plug −
D0312457102 O-Ring For protection Plug
14. Disposing Product
Consult with your dealer from whom you purchased it about waste disposal.
23
(Control Unit)
Model Surgic Pro
+
(with USB)
Surgic Pro
(Without USB)
Type NE250 (with USB)
NE294 (without USB)
Power Supply Voltage AC120V / 230V
Frequency 50/60Hz
Power Consumption 40VA
Max. Pump Output 75ml/min
Dimensions
W265xD220xH100mm
Weight Approx. 3.5kg
Torque(*) 5-80N
•
cm
* at Gear Ratio [20:1] with X-SG20L or SG20.
Torque: ± 20% (Range 5-50N
•
cm),
Torque: +10, -30 % (at 80N
•
cm)
(Micromotor)
Model SGL70M SG70M
Type E1023 E1025
Rotation Speed Range 200 – 40,000 min
-1
Input Voltage DC24V
Dimensions Ø23.5xL103.3mm (without cord)
Cord Length 2m
OPTIC White LED −
Weight Approx. 280g
(Foot Control)
Model FC-78
Cord Length 2m
Dimensions W250xD168xH55mm
Weight Approx. 1.2kg