Why is the ON-OFF LED flashing with a notification sound on my NSK VOLVERE i7?
If the ON-OFF LED is flashing and you hear a notification sound on your NSK Engine, it means the motor is experiencing an unexpected load. To resolve this, remove your foot from the control pedal or press the ON-OFF Key to stop the rotation.
What to do if the Power LED is on, but the bur doesn't rotate on my NSK VOLVERE i7?
If the Power LED turns on but the bur doesn't rotate on your NSK Engine, there could be several reasons: 1. If the motor rotates with the ON-OFF Key but not with the Foot Control, turn the power OFF, and perform the procedure indicated in “Operation Procedure” again. 2. If the motor doesn't rotate with either the ON-OFF Key or the Foot Control, turn the power OFF, and perform the procedure indicated in “Operation Procedure” again. 3. If the Power was turned ON while depressing the Foot Control, remove your foot from the Foot Control, and then press it down again.
Why is the REVERSE LED flashing with a notification sound on my NSK VOLVERE i7 Engine?
If the REVERSE LED is flashing and you hear a notification sound on your NSK Engine, it indicates that the internal temperature of the motor is rising due to continuous load, even if it's below the overload threshold. To fix this, wait for the internal temperature to drop. Then, depress the control pedal or press the ON-OFF Key.
What to do if the AUTO CRUISE LED flashes with a notification sound on my NSK Engine?
If the AUTO CRUISE LED flashes and you hear a notification sound on your NSK Engine, it means the motor is stopping to protect itself from overvoltage. Turn the power OFF and then ON again.
How to fix the bur coming out of my NSK Engine?
If the bur comes out of your NSK Engine, it is likely that the chuck is loose. To resolve this, securely tighten the chuck.
What does it mean when the ON-OFF LED and REVERSE LED flash with a notification sound on my NSK VOLVERE i7?
If the ON-OFF LED and REVERSE LED are flashing accompanied by a notification sound on your NSK Engine, it means that system data could not be loaded when the power was turned ON, disabling key operations. To resolve this, turn the power OFF and then ON again.
How to resolve rotation adjustment issues with the Speed Control Knob on my NSK VOLVERE i7 Engine?
If the rotation cannot be adjusted using the Speed Control Knob on your NSK Engine, and you are using the Control Unit, turn the power OFF, and perform the procedure indicated in “Operation Procedure” again.
What causes heavy run out of the bur on my NSK Engine?
If the run out of the bur is heavy on your NSK Engine, it could be due to dust stuck in the chuck or a worn chuck. Try cleaning the inside of the chuck. If that doesn't solve the problem, consider replacing the chuck.
What to do if the Power LED doesn't turn on when I power on my NSK VOLVERE i7 Engine?
If the Power LED does not turn on when you turn on your NSK Engine, ensure that the Power Cord is fully inserted into the power supply outlet and inlet.
Identifies and explains the functions of the control unit's front and rear panel components.
Identifies and explains the components of the foot control pedal.
Step-by-step instructions for properly connecting the power cord to the unit.
Step-by-step instructions for properly connecting the foot control to the unit.
Step-by-step instructions for connecting the motor handpiece to the control unit.
Procedure for securely attaching and detaching the handpiece from the motor.
Detailed procedure for inserting and removing burs from the handpiece chuck.
Guide on initiating operation using the foot control or control unit buttons.
Explains the meaning of various beeps, sounds, and LED indicators during operation.
Describes how the unit retains settings and status when powered off.
Details the overload protection mechanism and how to manage warnings.
Instructions for the proper removal, cleaning, and reattachment of the chuck.
Guidelines for cleaning the exterior surfaces of the control unit, motor handpiece, and foot control.
Procedure for securely connecting and disconnecting the motor and its cord.
Step-by-step instructions for replacing worn carbon brushes in the motor.
Lists common error indicators, their causes, and recommended solutions for system faults.
Provides solutions for common operational issues and problems encountered with the system.
Technical data and specifications for the control unit, handpiece, motor, and foot control.
Details the equipment's safety classifications regarding electrical protection and water resistance.
To Next Page
General
