To Next PageTo Next PageWhat to do if the NTI TRX110C shows a Lockout Error?
If your NTI Boiler displays a Lockout Error, press the RESET button on the control panel to restore boiler operation. If the Lockout Error occurs frequently, contact a qualified service technician for assistance.
What to do if NTI TRX110C Boiler shows Error 108 related to water pressure?
If your NTI Boiler shows Error 108, you can increase the pressure by filling the heating circuit. If Error 108 occurs frequently and the system needs repeated refilling, turn the boiler off, turn the external electric power to the OFF position, and shut off the main gas valve. Then, contact a qualified service technician to check for any water leaks.
General| Fuel Type | Natural Gas or Propane |
|---|---|
| Efficiency | 95% AFUE |
| Boiler Type | Condensing |
| Heat Exchanger Material | Stainless Steel |
| Input BTU | 110, 000 BTU/h |
Crucial warnings for safe operation and installation of the boiler, covering fire hazards and ventilation.
Detailed steps for securely mounting the boiler to concrete or wood stud walls.
Requirements and guidelines for installing the boiler's venting and air intake system.
Safety and grounding requirements for electrical connections to the boiler.
Instructions for sizing gas supply lines, installing shut-off valves, and checking pressure.
Step-by-step guide for configuring boiler settings using the setup wizard.
Accessing and adjusting advanced boiler parameters via the technical menu.
Procedures for testing burner, outputs, and air purge functions for diagnostics.
Essential safety checks for gas leaks before initial boiler operation.
