To Next PageTo Next PageWhat to do if my NTI TRX199 Boiler shows Error 108?
If your NTI Boiler displays Error 108 due to insufficient water pressure, you can increase the pressure by filling the heating circuit. If Error 108 occurs frequently, turn the boiler off, turn the external electric power to the OFF position, shut off the main gas valve, and contact a qualified service technician to check for any water leaks.
How to fix Lockout Error on NTI TRX199 Boiler?
If your NTI Boiler experiences a Lockout Error, press the RESET button on the control panel to restore boiler operation. However, if the Lockout Error occurs frequently, it is recommended to contact a qualified service technician for assistance.
What to do if NTI TRX199 shows Blocking Error?
If your NTI Boiler displays a Blocking Error, it will clear automatically once the CH temperature decreases. The boiler will then restart and operate normally.
General| Brand | NTI |
|---|---|
| Model | TRX199 |
| Category | Boiler |
| Fuel Type | Natural Gas |
| Efficiency | 95% |
Crucial safety warnings for boiler operation and installation.
Hazards and prevention measures for improper combustion.
Safety precautions related to gas supply and shut-off.
Information on setting water temperatures and preventing scalding injuries.
Guidelines for selecting an appropriate, safe, and accessible installation location.
Required minimum clearances around the boiler for maintenance and service.
Step-by-step procedures for securely mounting the boiler on walls.
Requirements for the boiler's direct vent and air intake piping system.
Mandatory requirements for the installation of CO detectors.
Methods and precautions to prevent contamination of combustion air intake.
Instructions for correctly connecting the water supply and return pipes to the boiler.
General requirements and safety warnings for boiler venting systems.
List of approved materials and standards for vent and intake piping.
Instructions for connecting the boiler's electrical power supply and low voltage controls.
Critical warnings regarding gas connections, potential leaks, and fire hazards.
Procedure for checking and adjusting gas pressure for optimal boiler operation.
Explanation of control panel buttons, display icons, and status indicators.
How the boiler automatically adjusts heating based on outdoor/indoor conditions.
How to access and navigate the technical menu for advanced configuration.
Importance of checking and controlling water chemistry for system health.
Procedures for safely checking gas lines for leaks before boiler operation.
Steps for filling, purging, and testing the heating system before start-up.
Steps for initial boiler start-up, including safety checks and ignition.
Procedure for checking and adjusting combustion parameters for optimal performance.
Checklist items for initial boiler start-up, adjustments, and system testing.
Checklist items for verifying burner flame and combustion values.
Explanation of boiler protection devices, including blocking and lockout errors.
A comprehensive list of boiler error codes, their descriptions, and remedies.
Overview of periodic maintenance requirements for safety and efficiency.
Tasks requiring a qualified service technician, including component replacement.
Troubleshooting steps for burner ignition failures and lockout states.
Important safety measures to take when working on the plumbing system.
