To Next PageTo Next PageWhat to do if my NTI TRX199C shows Error 108?
If your NTI Boiler displays Error 108 due to insufficient water pressure, you can increase the pressure by filling the heating circuit. If Error 108 occurs frequently, turn the boiler off, turn the external electric power to the OFF position, shut off the main gas valve, and contact a qualified service technician to check for any water leaks.
How to fix Lockout Error on NTI TRX199C Boiler?
If your NTI Boiler experiences a Lockout Error, press the RESET button on the control panel to restore boiler operation. However, if the Lockout Error occurs frequently, it is recommended to contact a qualified service technician for assistance.
What to do if NTI Boiler shows Blocking Error?
If your NTI Boiler displays a Blocking Error, it will clear automatically once the CH temperature decreases. The boiler will then restart and operate normally.
General| Brand | NTI |
|---|---|
| Model | TRX199C |
| Category | Boiler |
| Efficiency | 95% AFUE |
| Boiler Type | Condensing |
| Heat Exchanger Material | Stainless Steel |
| Fuel Type | Natural Gas |
Fire or explosion risk if instructions not followed.
Steps to take if gas smell is detected.
Imminent hazard, results in death or serious injury.
Risks of high water temperatures and scalding prevention.
Guidelines for selecting the boiler's installation location.
Step-by-step instructions for wall mounting.
Vent system requirements for Category IV appliances.
Importance of proper expansion tank sizing and installation.
Installation and requirements for pressure relief valves.
Guidelines for proper termination of vent and intake pipes.
Guidelines for sizing vent and intake pipes.
Procedures for venting through existing systems.
Requirements for gas connection fittings and lines.
