To Next PageTo Next PageWhat to do if the NTI TRX085 Boiler shows a Lockout Error?
If your NTI Boiler displays a Lockout Error, press the RESET button on the control panel to restore boiler operation. If the Lockout Error occurs frequently, contact a qualified service technician for assistance.
What to do if NTI TRX085 shows Error 108 related to water pressure?
If your NTI Boiler shows Error 108, you can increase the pressure by filling the heating circuit. If Error 108 occurs frequently and the system needs repeated refilling, turn the boiler off, turn the external electric power to the OFF position, and shut off the main gas valve. Then, contact a qualified service technician to check for any water leaks.
Critical warnings for operating and installing the boiler to prevent property damage or injury.
Potential issues and hazards arising from improper combustion, including ventilation requirements.
Guidelines for selecting an appropriate, safe, and accessible installation location.
Step-by-step instructions for securely mounting the boiler on walls.
Requirements and procedures for installing the exhaust vent and intake piping.
General instructions and safety precautions for electrical wiring.
Overview of the boiler's control panel, buttons, and display interface.
Step-by-step guide for initial boiler setup using the wizard.
Interpreting diagnostic information and understanding boiler error codes.
Safety procedures for checking for gas leaks before boiler operation.
Steps for filling, purging, and testing the boiler and heating system.
Step-by-step guide for the initial boiler ignition and setup.
Detailed procedure for checking and adjusting boiler combustion.
Explanation of boiler shut-off types (Blocking, Lockout) and error codes.
Table listing specific error codes, possible causes, and remedies for various circuits.
General
