2.7.5 TCP/IP web page
The TCP/IP web page can be opened from the Advanced Configuration web
page (2.7.2) by clicking on TCP/IP.
Select Automatic as IP Lookup Method. The SafeCom Controller can obtain its
IP address and related information automatically from a DHCP, BOOTP, or RARP
server in the network. Or you can choose to use the manually specified IP
address.
Check Enable WINS if Windows Internet Name Service (WINS) is enabled and
the SafeCom Controller should register its IP address, NetBIOS name, and
WorkGroup name with a WINS server.
DNS Servers. The SafeCom Controller uses the listed Domain Name System
(DNS) servers to resolve hostnames and IP addresses. A maximum of 14 DNS
servers can be specified.
To Next Page
Loading...