Numark CM 200 User Manual

17
SPECIFICATIONS
Inputs
Line: 10Kohm input impedance
77mV rms sensitivity for 1.22V output
Mic: 600 ohm input impedance unbalanced
1mv rms sensitivity for 1.22V output
70mV rms max input
Phono: 47Kohm input impedance
1.2mV rms sensitivity @1KHz for 1.22V output
Outputs
Line: 9V rms max
Headphone: 0.5W into 47 ohm
Distortion: less than 0.01%
Signal to Noise Ratio (maximum output) JIS-A weighted
Line: Better than 98.dB
Mic: Better than 86dB
Phono: Better than 81dB
Frequencey Response
Line: 20Hz-20KHz ±0.5dB
Mic: 20Hz-15KHz ±0.5dB
Phono: ±1dB except for controlled attenuation of –3dB
@ 20Hz to reduce rumble and feedback
Channel Equalizer DJ Mic Equalizer
Bass: +12/-32dB @60Hz Bass: ±10dB @100Hz
Middle: +12/-32dB @1.2KHz Treble: ±10dB @15KH
Treble: +10/-28dB @15KH
Power Consumption
11 Watt typical
14.7 Watt with full headphone output

Numark CM 200 Specifications

Input Specifications

line input impedance	10Kohm
mic input impedance	600 ohm
phono input impedance	47Kohm

Output Specifications

line output voltage	9V rms max
headphone output power	0.5W into 47 ohm
distortion	less than 0.01%

Signal to Noise Ratio

line signal to noise ratio	Better than 98dB
mic signal to noise ratio	Better than 86dB
phono signal to noise ratio	Better than 81dB

Frequency Response

line frequency response	20Hz-20KHz ±0.5dB
mic frequency response	20Hz-15KHz ±0.5dB
phono frequency response	±1dB except for controlled attenuation of –3dB @ 20Hz

Power Consumption

typical power consumption	11 Watt
power consumption with full headphone output	14.7 Watt