Numark CM 200 User Manual

2
NORMAL
FILTERS
FLANGER
AUTOPAN
LR
AUTOCUT
FILTERED
LOPASS
VARI-CUT
RATE
RATE
DVD PLAYER
CD PLAYER
DVD PLAYER
TO LINE
TO LINE
TO LINE
CD PLAYER CD PLAYER DJ MIC
TO PHONO 2
TO PHONO 1
TO PHONO 3
TO LINETO LINE
TO MIC
HOUSE AMP
DJ HEADPHONE
TO AMP TO AMP
TO MIC
TO MIC
CD BURNER
TAPE DECK
or or
FROM RECORD
OR
MP3 PLAYER
DUAL CD PLAYER
TO LINETO LINETO LINETO LINE
TO LINE
FROM
FADER
START
REMOTE MIXER
OUTPUT
BOOTH AMP

Numark CM 200 Specifications

Input Specifications

line input impedance	10Kohm
mic input impedance	600 ohm
phono input impedance	47Kohm

Output Specifications

line output voltage	9V rms max
headphone output power	0.5W into 47 ohm
distortion	less than 0.01%

Signal to Noise Ratio

line signal to noise ratio	Better than 98dB
mic signal to noise ratio	Better than 86dB
phono signal to noise ratio	Better than 81dB

Frequency Response

line frequency response	20Hz-20KHz ±0.5dB
mic frequency response	20Hz-15KHz ±0.5dB
phono frequency response	±1dB except for controlled attenuation of –3dB @ 20Hz

Power Consumption

typical power consumption	11 Watt
power consumption with full headphone output	14.7 Watt