EasyManuals Logo

Nuna Exec User Manual

Nuna Exec
38 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #34 background imageLoading...
Page #34 background image
Without Lower Anchors
This installation should ONLY be used if installation
with lower anchors is not possible.
1 - WARNING: When the child restraint is
installed without lower anchors, the leg rest
MUST be minimally extended and angled down
towards the vehicle seat (p.32).
2 - Leg rest MUST NOT be extended or angled out
enough that a child can step on it and tip the child
restraint over, which could cause serious injury.
3 - Leg rest MUST NOT be pushing into the vehicle
seat enough to lift the child restraint off the seat.
4 - When not using lower anchors, the back of
the booster seat MUST fit tightly against the
back and bottom of the vehicle seat. Adjust
or remove the vehicle headrest as needed to
remove interference.
Check Installation
Harness is stored.
Seat is in booster recline position.
Seat does not interfere with the vehicle headrest.
Leg rest is minimally extended and down against
vehicle seat.
Back and bottom of booster fit tightly against
vehicle seat.
WARNING: When NOT secured by lower
anchors, booster MUST be secured with vehicle
belt when unoccupied to avoid becoming a
projectile. Route vehicle belt as in forward facing
use (p.52 or 56) or as though securing a child.
WARNING: Check that child restraint is
securely installed before each use.
64 EXEC
instructions
1
2
65EXEC
instructions
3
4

Other manuals for Nuna Exec

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Nuna Exec and is the answer not in the manual?

Nuna Exec Specifications

General IconGeneral
Recline positions8 positions
Adjustable headrestYes
OrientationRear-facing and forward-facing
Safety featuresSide-impact protection, energy-absorbing foam
Product Weight26.6 lbs
Expiration10 years
Safety StandardsFMVSS 213 certified
Installation methodBelt path, LATCH

Related product manuals