Do you have a question about the Nuna KLIK plus and is the answer not in the manual?
Details on using the tether strap and storing its end in the provided bag.
Confirms the restraint must be securely latched into the base.
Advises on ensuring the vehicle belt is secure and pulled tight.
Specifies that the base must be reclined correctly for installation.
Guidance on forward-facing seats, rearward orientation, and airbag risks.
Advises on installing in forward-facing rear seats, preferably the center.
Instructions for positioning the base on a forward-facing vehicle seat.
Guidance on using the recline adjustment for the correct installation angle.
Pass the vehicle belt through the base's 'BELT PATH' openings.
Push base firmly and pull belts tight, then engage lock-off.
Confirm that the vehicle seat belt buckle is properly engaged.
Critical warnings regarding shared anchorages and airbag proximity.
Steps to ensure no obstructions and lower the restraint for a 'CLICK'.
Requirement to attach the restraint to a child restraint upper anchorage point.
Warning against using if the tether strap falls into seat splits.
Always secure the loose end to prevent access by child or hanging out.
Caution about securing cargo to prevent restraint damage in collisions.
How to connect the tether strap to the vehicle anchorage.
Warning not to adjust tether too tight, which lifts the restraint.
Caution against overtightening the attachment bolt (max 20Nm).
Details on using the tether strap and storing its end in the provided bag.
Confirms the restraint must be securely latched into the base.
Advises on ensuring the vehicle belt is secure and pulled tight.
Specifies that the base must be reclined correctly for installation.
Guidance on forward-facing seats, rearward orientation, and airbag risks.
Advises on installing in forward-facing rear seats, preferably the center.
Instructions for positioning the base on a forward-facing vehicle seat.
Guidance on using the recline adjustment for the correct installation angle.
Pass the vehicle belt through the base's 'BELT PATH' openings.
Push base firmly and pull belts tight, then engage lock-off.
Confirm that the vehicle seat belt buckle is properly engaged.
Critical warnings regarding shared anchorages and airbag proximity.
Steps to ensure no obstructions and lower the restraint for a 'CLICK'.
Requirement to attach the restraint to a child restraint upper anchorage point.
Warning against using if the tether strap falls into seat splits.
Always secure the loose end to prevent access by child or hanging out.
Caution about securing cargo to prevent restraint damage in collisions.
How to connect the tether strap to the vehicle anchorage.
Warning not to adjust tether too tight, which lifts the restraint.
Caution against overtightening the attachment bolt (max 20Nm).
| Product Type | Infant Car Seat |
|---|---|
| Compatibility | Nuna strollers (with adapters) |
| Height Limit | 32 inches |
| Safety Features | Side Impact Protection (SIP) |
| Product Category | Infant Car Seat |
| Load Leg | Yes |
| Certifications | Meets or exceeds US safety standards |
| Safety Standards | Complies with US FMVSS 213 |