Bassinet Cover
1 - Place the bassinet cover on top of the bassinet so the
closed section is on the foot end.
2 - Fasten the bassinet cover with the magnets to the sides
of the bassinet and at the foot end.
Product Use
Bassinet Attachment on Stroller Frame
WARNING
The MIXX series bassinet, when used on the MIXX
series stroller, can only be used as a carry cot.
Never leave child unattended.
Check to be sure carry cot is securely attached by
pulling up on the carry cot.
The carry cot can only be used with the MIXX
series stroller.
Do not fold the stroller when the carry cot is
attached.
3
- Line up the mounts on the side of the carry cot with the
stroller mounts as shown.
4 - Attach to the MIXX series stroller mounts by inserting
the attachment mounts onto both sides of the stroller
frame until the carry cot CLICKS into place. CHECK
to make sure it is securely attached by pulling up.
The carry cot can attach in a rear-facing or forward-facing
mode when on the stroller frame.
5 - To remove the bassinet from the MIXX series stroller,
press the carry cot release buttons on both sides while
lifting the carry cot up.
2
1
3
4
5
click
click
To Next Page
Loading...
Need help?
General
