Attachment Mounts
1 - Make sure the attachment mounts are outside of the
bassinet.
2 - Rotate the attachment mounts down the side of the
bassinet on both sides until they click into the latch as
shown.
Make sure you hear a “click”.
3 - To disassemble the bassinet, push the button on the
latch on the underside of the bassinet and pull the
attachment mount out.
Canopy
4 - To open the canopy, rotate the canopy up.
5 - The handle will stop in the convenience position for
accessing child. To continue to open the canopy further,
push the buttons on both sides of the handle and pull
canopy towards the foot end of the bassinet until it
clicks into the fully extended position.
Be sure handle is locked in the fully extended position
before lifting the bassinet by the handle.
6 - To close the canopy, press the canopy folding buttons
simultaneously on both sides, and rotate down.
2
1 4
3 6
5
convenience
position
fully-
extended
position
click click
click
To Next Page
Loading...
Need help?
General
