Nuna PIPA LITE R User Manual

1
2
3
Head and Body Support
The head and body supports can
be used as necessary, to provide a
snug fit for small babies.
The head support straps cannot
go through the same slots as the
harness and should only be used in
the top two harness slot positions.
1 - To remove the head support,
unfasten the hook and loop
ends behind the seat fabric.
2 - Pull the head support straps
through the harness slots.
3 - To remove the body support,
unbuckle the harness and route
the buckle and crotch belt
through the bottom slot of the
body support.
The body support can be used
for smaller babies, but MUST
be removed once a snug fit
can be achieved without it, at
approximately 11 pounds.
PIPA lite r instructions 25PIPA lite r instructions24

Nuna PIPA LITE R Specifications

General

Weight Capacity	4 to 32 lbs
Height Capacity	Up to 32 inches
Harness	5-point harness
Material	Aerospace aluminum
Safety Features	Side impact protection
Car Seat Base Included	No
Recline Positions	Multiple
Compatibility	Compatible with strollers