Product Use
1 - Top of child’s head is at least 1” below top of
child restraint.
Securing Child in Child Restraint
2 - Loosen harness by pressing on adjuster button
while pulling on the harness straps.
3 - Press button to release the buckles. Separate
chest clip and spread harness straps apart.
4 - Place child in child restraint in seated position.
5 - The child should be seated against both the
back and bottom of the seat with no gap
behind the child. Do not allow child to slouch.
Gently guide child’s arms through harness loops.
6 - Insert buckle tongues into buckle.
1
2
2
1
2
3
4
5
6
29PIPA instructions28 PIPA instructions
1 in
(25 mm)
To Next Page
Loading...
