49PIPA instructions48 PIPA instructions
When installing in an airplane using a base, follow
the instructions for vehicle installation with a base
using lap belt only.
This child restraint is certified for use in commercial
aircraft with or without the base. Be sure to contact
your airline prior to travel to discuss their use
policy.
Installation on a Stroller
This carrier can attach to Nuna strollers using
adapters. Instructions are included with the
adapters, which are sold separately.
This carrier can also attach to other brands of
strollers using adapters. Please visit nunababy.com
for more information.
Cleaning and Maintenance
Refer to the care label attached to the soft goods
for washing and drying instructions.
DO NOT attempt to remove the foam under the
seat pad.
Use only mild detergent, water and a soft cloth to
clean the infant carrier shell, handle and harness
straps. Air dry.
To clean the buckle: rinse using warm water. DO
NOT use any soaps, solvents or lubricants. Using
anything other than water can cause the buckle to
malfunction. Air dry.
Remove the child restraint from the vehicle seat if
not in use for a long period of time. Put the infant
carrier in a cool, dry place and somewhere your
child cannot access it.
It is normal for fabric to color from sunlight and to
show wear and tear after a long period of use, even
when used normally.
Check regularly if everything functions properly.
If any parts are torn, broken, or missing, stop using
this product.
Nuna Baby Essentials, Inc. Nuna and all associated logos are trademarks.
To Next Page
Loading...
