23
MYTHOS
EN
or to know the total number of coffees, with the possibility of zeroing the quantity;
or to know the number of times the motor has started.
Finally it is possible to count the grind times: the time the machine has continuously ground
coffee (can be zeroed);
is the total time in which the machine has been active (cannot be zeroed).
If it is possible to reset the values for the dose keys, by holding down the CONFIRM key
for 2 secs.
7.4.8
MANUAL, AUTOMATIC AND BARISTA MODE SELECTION
Continuing the programming with the button will take you to the choice of manual,
automatic or barista mode, which can be selected by pressing the flashing key; each time
you press the key, you will be selecting the mode indicated in the top right-hand corner of
the display.
7.4.9
“STOP AND GO” FUNCTION ON/OFF
The "STOP AND GO" function serves to interrupt and then proceed with ground coffee dis-
pensing, even several times, until the set time of the dose has expired, simply by pressing
or releasing the micro (6) at the base of the fork (10).
Pressing the flashing
key switches the function "ON" or "OFF". This function can be
used on all modes: manual, automatic, and barista.
6723$1'*2 21
&+$1*(
727$/&2817
$18/
!
67$57180%(5
!
&217,182867,0(
$11
!
*(1(5$z/7,0(
!
'()$8/76(77,1*
6(7
!
23(5$7,21$872
&+$1*(
!
To Next Page
Loading...
Need help?
General
