Nussbaum 4.50H - 2 Master document of the automotive lift; 2.1 Lift-manufacturer; 2.2 Application; 2.3 Changes to the construction

Operating instructions and documentation

4.50H/ 4.50H plus

- 8 -

2 Master document of the automotive lift

2.1 Lift-manufacturer

Otto Nußbaum GmbH & CO.KG

Korker Straße 24

D-77694 Kehl-Bodersweier

2.2 Application

The automotive lift 4.50H/ 4.50H plus is a lifting mechanism for lifting motor vehicles with a total

weight of up to 5000 kg (11000 lb). The maximum load distribution is 2:1 or 1:2 in or against drive-

on direction.

It is not allowed to install the standard automotive lift in a hazardous location. It is also not allowed

to carry persons on the lift.

After construction changes, repair or displacement, the lift needs to be rechecked by an expert.

2.3 Changes to the construction

Changes to the construction, expert checking, resumption of work

(date, kind of change, signature of the expert)

..............................................................................................................................................................

....................................................................................................................................................…......

name, address of the expert

........................................................... ............................................................

place, date signature of the expert

2.4 Displacement of the automotive-lift

Displacement of the automotive-lift, expert checking, resumption of work (date, kind of

change, signature of the competent)

..............................................................................................................................................................