1110
• Do not fill the Work Bowl
above the marked maximum
fill line to avoid risk of injury
due to damage to the cover
or bowl.
PRODUCT SAFETY
• Do not overload the Feed
Chute with ingredients that
may overheat the motor or
damage the Work Bowl. Wait
until food naturally moves
down the Feed Chute and
into the Work Bowl before
adding more food.
GENERAL BLADE
AND DISC SAFETY
PERSONAL SAFETY
Blades and Discs are sharp!
Handle with care to avoid
bodily injury. Non-food items
or hard ingredients may
damage the various Blades
and Discs of your nutribullet
®
.
Routinely inspect the Blades
and Discs and discontinue
use if damaged. Continued
use with damaged Blades or
Discs or use inconsistent with
these instructions may result
in bodily injury, property
damage, or damage to
your unit.
Do not touch the sharp edges
of the Blades or Discs. To
avoid laceration injury, do not
Pusher to push food down
the Feed Chute. This may
overheat the motor or
damage the Work Bowl. For
best results, start your Food
Processor before placing
food into the Feed Chute.
• NEVER put hands, fingers or
utensils in the Feed Chute
or Work Bowl. Only use the
provided Dual-Size Food
Pusher to push food down the
Feed Chute.
• NEVER place hands or
utensils near moving Blades
or Discs while processing
food to reduce the risk of
severe injury to persons
or damage to the food
processor. A scraper may be
used but must be used only
when the food processor is
not running.
• NEVER store exposed Blade
attachments or Discs in
the Work Bowl. Exposed
Blades can present a
dangerous hazard, resulting
in injury. Always cover stored
attachments with the Work
Bowl Lid.
• A scraper or spatula may be
used BUT ONLY WHEN THE
APPLIANCE IS POWERED OFF.
• Be certain cover is securely
locked in place before
operating appliance.
handle or touch any sharp
parts of the Blade or Disc.
NEVER store exposed Blades
or Discs in the Work Bowl or
on the Motor Base. Exposed
Blades and Discs can present
the hazard of severe personal
injury. Always cover exposed
Blades and Discs with the
Work Bowl Lid or Cup. An
exposed Blade or Disc can
present a laceration hazard.
• Do not remove the Cup,
Blending Pitcher, or Work
Bowl until Blades have
come to a complete stop.
Removing before the Blades
come to a complete stop
can cause damage to the
attachments or unit.
• Always POWER OFF and
UNPLUG the unit and wait
until the Blades or Discs
come to a complete
stop before assembling,
disassembling, changing
accessories, or cleaning.
• To reduce the risk of injury,
never place cutting Blade
or Discs on the Motor Base
without first putting bowl
properly in place.
• AVOID CONTACT WITH
MOVING PARTS! Do not
attempt to defeat any safety
interlock mechanisms. Keep
hands and utensils out of
and away from the Blades
or Discs to reduce the risk
of severe personal injury or
damage to the unit.
PRODUCT SAFETY
• NEVER place the Blades or
Discs or any nutribullet
®
part
or accessory on the bottom
rack, or use the heat/sanitize
cycle of your dishwasher
when cleaning.
• Periodically inspect the
Blades and Discs for damage.
DO NOT use any Blade or
Disc if damaged and contact
Customer Service.
• Periodically inspect your
Extractor Blade and Pitcher
Blade. If the blades do not
rotate freely or are damaged,
immediately discontinue
use and contact Customer
Service. If the gasket to the
Extractor Blade is missing
or damaged, discontinue
use and contact Customer
Service. We recommend
replacing the Extractor Blade
every 6 months (depending
on use), or as needed for
optimal performance.
WARNING!
To Next Page
Loading...
