NUTRIBULLET NBP-200 - Page 7

1312
GENERAL PRODUCT
SAFETY
Modification, improper use,
and failure to follow the
instructions for proper set
up, use, and care of your
nutribullet
®
Triple Prep System
can increase the risk of serious
personal injury, death, or
property damage.
• Do not use the unit in
countries or locations
with dierent electrical
specifications or plug types.
• Do not use the unit with a
voltage converter device, as
it may cause electrical
shorting, fire, electric shock
resulting in personal injury or
product damage.
• Do not use the unit in an area
that is wet, or anywhere it
could become wet.
• Do not place any nutribullet
®
part or accessory in a
microwave, conventional
oven, air fryer, or stovetop pot,
or immerse in boiling water,
as this will damage the part.
• Do not attempt to plug the
unit into an electrical outlet
with wet hands.
• Avoid contact with the
touchscreen display when
the power icon is illuminated
to prevent inadvertent and
unexpected operation of
the unit.
• Do not use the cord, plug,
or Motor Base if it has been
immersed in water or other
liquids. Any significant spillage
on, under, or around the
Motor Base should be cleaned
and dried before plugging in
and using the unit.
• Do not modify the electrical
cord in any way.
• Do not operate any unit with
a damaged electrical cord
or plug. The electrical cord
and plug are not suitable for
replacement. If damaged,
the appliance should be
replaced. Contact Customer
Service for assistance at:
AU: 1300 285 538 /
NZ: 0800 232 633.
• Do not allow or place the
electrical cord near or
touching any hot surfaces,
heat source, or flame,
including the stove.
• Do not allow the electrical
cord to hang over the edge of
a table or counter.
• Do not pull, twist, or damage
the power cord.
• Overloading the unit may
overheat the motor and
engage the thermal breaker.
If the internal thermal
breaker shuts o the motor,
unplug the Motor Base and
let it cool for an hour before
attempting to use it again.
The thermal breaker will reset
when the unit is unplugged
and the thermal breaker
cools down.
• Always UNPLUG your
nutribullet
®
when it is not in
use, and when assembling,
disassembling, changing
accessories, or cleaning.
• NEVER pull from the power
cord to unplug. To unplug,
grasp the plug and pull from
the outlet.
• Do not use the Blades
or Discs for grinding dry
ingredients such as grains,
cereal, or coee, as this may
damage the motor and/or
the Blades and Discs. Use of
dry ingredients may cause
the motor to overheat.
• Do not overload the Cup,
Blending Pitcher, Food
Chute, or Work Bowl, as this
may result in the Blades or
Discs ceasing to function. If
this occurs, turn o the unit,
empty some of the contents,
reattach, and resume.
• NEVER obstruct the
ventilation openings on the
bottom of the Motor Base of
your nutribullet
®
Triple Prep
System. Openings on the
bottom of the Motor Base
should be free of dust and
lint and never obstructed.
Obstructing the ventilation
openings may overheat
the motor, presenting a
fire hazard that may cause
serious personal injury,
death, or property damage.
• ALWAYS operate the
nutribullet
®
on a level surface,
leaving unobstructed space
beneath and around the
Motor Base to permit proper
air circulation. Slots on the
bottom of the Motor Base are
provided for ventilation to
ensure reliable operation
and to prevent the motor
from overheating.
• NEVER place your
nutribullet
®
on top of
flammable materials such
as newspapers, tablecloths,
napkins, dishtowels, place
mats, or other similar type
of materials.
!
Save these
instructions!