EasyManua.ls Logo

NUTRIBULLET TRIPLE PREP SYSTEM - Electrical Safety

NUTRIBULLET TRIPLE PREP SYSTEM
649 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2120
compatible with your
unit.
ELECTRICAL SAFETY
Modification, improper
use, and failure to follow
the instructions for
proper set up, use, and
care of your nutribullet
®
Triple Prep System can
increase the risk of
serious personal injury,
death, or property
damage.
Do not use the unit in
countries or locations
with dierent electrical
specifications or plug
types.
Do not use the unit with
a voltage converter
device, as it may cause
electrical shorting, fire,
electric shock resulting
in personal injury or
product damage.
Do not use the unit in
an area that is wet,
or anywhere it could
become wet.
Do not attempt to
plug the unit into an
electrical outlet with wet
hands.
Avoid contact with the
touchscreen display
when the power icon is
illuminated to prevent
inadvertent and
unexpected operation
of the unit.
Do not use the cord,
plug, or Motor Base if it
has been immersed in
water or other liquids.
Any significant spillage
on, under, or around
the Motor Base should
be cleaned and dried
before plugging in and
using the unit.
Do not modify the
electrical cord in any
way.
Do not operate any
unit with a damaged
electrical cord or plug.
The electrical cord and
plug are not suitable
for replacement.
If damaged, the
appliance should be
replaced. Contact
Customer Service
for assistance at
nutribullet.com.
Do not allow or place
the electrical cord near
or touching any hot
surfaces, heat source,
or flame, including the
stove.
Do not allow the
electrical cord to hang
over the edge of a table
or counter.
Do not pull, twist, or
damage the power
cord.
Overloading the unit
may overheat the motor
and engage the thermal
breaker. If the internal
thermal breaker shuts
o the motor, unplug
the Motor Base and
let it cool for an hour
before attempting
to use it again. The
thermal breaker will
reset when the unit is
unplugged and the
thermal breaker cools
down.
Always UNPLUG your
nutribullet
®
when
it is not in use, and
when assembling,
disassembling,
changing accessories,
or cleaning.
NEVER pull from the
power cord to unplug.
To unplug, grasp the
plug and pull from the
outlet.
Use of incompatible
parts or aftermarket
parts may result
in damage to your
nutribullet
®
or create
safety hazards that
may cause personal
injury or damage. When
ordering replacement
parts, always use
genuine nutribullet
®
parts and accessories
from nutribullet.com.
VENTILATION
NEVER obstruct the
ventilation openings
on the bottom of the
Motor Base of your
nutribullet
®
Triple Prep

Table of Contents

Related product manuals