NUTRIBULLET TRIPLE PREP SYSTEM - Care and Maintenance

Care & maintenance
PLEASE KEEP THESE
IMPORTANT SAFEGUARDS
IN MIND WHEN USING YOUR
NUTRIBULLET
®
:
• Always power o and unplug
your nutribullet
®
when not
in use or when assembling,
disassembling, changing
accessories, or cleaning.
• Always wait until the motor
comes to a complete stop
before handling or removing
any attachment.
• Do not place any nutribullet
®
part, accessory, or attachment
in the microwave, they are not
microwave-safe.
• Do not leave Blade or Discs
exposed when storing. Blades
and Discs are sharp, always
cover.
• NEVER wash your nutribullet
®
part or accessory using the
sanitize or heat cycle of your
dishwasher. Doing so can
warp the part, which can
create hazardous conditions
during use that may result
in bodily injury or property
damage.
• Do not attempt to clean the
Motor Base by immersing
in water or other cleaning
liquids. Gently wipe and dry
with a clean cloth.
• Do not place any parts or
accessories in a microwave,
conventional oven, air fryer,
or stovetop pot, or immerse
in boiling water to clean or
sanitize, as this will damage
the part.
• Make sure that the Motor
Base ventilation openings are
unobstructed and clean.
• Periodically inspect your
nutribullet
®
Triple Prep System
components for damage or
wear that may impair proper
function or present a safety
hazard. Never operate your
nutribullet
®
with damaged
parts or components:
– Discontinue use if you
detect cracking, cloudiness,
warping, or damage to the
Cups, Blending Pitcher, or
Work Bowl.
– Discontinue use if the
Extractor Blade does not
rotate freely or if the gasket
50
is missing or damaged.
Continued use with a
damaged blade or use
inconsistent with these
instructions may result
in bodily injury, property
damage, or damage to
your unit.
• NEVER attempt to use your
nutribullet
®
if it malfunctions or
is damaged or compromised
in any way. Immediately
contact customer service at
nutribullet.com.
• Do not use the Extractor
Blade if it does not rotate
freely. Depending on use, it is
recommend that the Extractor
Blade be replaced at least
every 6 months, depending
on use.
• NEVER use after-market
replacement parts for
your nutribullet
®
Triple
Prep System. Aftermarket
parts are not made to
nutribullet
®
specifications
and may damage your unit
or cause serious injury. Use
only genuine nutribullet
attachments/accessories
specifically designed for
your nutribullet
®
Triple
Prep System. For questions
concerning replacement
parts, contact Customer
Service at nutribullet.com.
51