4948
5 Plug in the Motor Base. The
Control Panel will illuminate
the food processor menu.
Select the High setting.
6 With the motor running,
twist the Food Pusher Lid
Cap clockwise to unlock and
remove the Inner Pusher to
access the small feed chute.
Or, leave the Inner Pusher
in place and remove the
entire Food Pusher to use the
larger chute. Use the pusher
to guide ingredients into the
bowl.
4 Place the Work Bowl Lid atop
the Work Bowl. Twist the Lid
clockwise and line up the
arrows to lock into place.
Insert the Food Pusher into
the Lid’s Feed Chute.
WARNING! Never use fingers
or utensils to push food down
the Feed Chute. Only use the
Food Pusher.
WARNING! Do not force food
down the Feed Chute. Use
the Food Pusher to gently
guide food down the Feed
Chute or allow the food
to move down the Chute
naturally.
7 When finished processing,
wait until the Blade stops
rotating before twisting
the Work Bowl Lid counter-
clockwise to unlock and
remove it from the Work
Bowl.
8 Twist the Work Bowl counter-
clockwise to unlock and
remove it from the Motor
Base.
9 Carefully remove the Slice/
Shred Disc. Use a spoon or
spatula to transfer chopped
ingredients.
WARNING! Blades and Discs
are sharp. Handle with care.
To Next Page
Loading...
