NUTRIBULLET TRIPLE PREP SYSTEM - Page 24

4746
9 Twist the Work Bowl counter-
clockwise to unlock and
remove it from the Motor
Base.
10 Carefully remove the Dough
Blade.
Using the Reversible Slice/Shred Disc:
slice or shred ingredients.
1 Place the Work Bowl on a flat,
clean, and dry surface. Place
the Blade Adapter atop the
central shaft and push the
Adapter down to secure into
place.
2 Place the Slice/Shred Disc
onto the Blade Adapter shaft.
NOTE: The Slice/Shred Disc is
reversible, with one side labeled for
shredding and the other for slicing.
WARNING! Blades and Discs
are sharp. Handle with care.
This Disc attachment can be
placed in 2 dierent positions on
the Blade Adapter. The lower
position is for storage, and the
higher position is for use. Hold
the center knob of the Disc, and
carefully place it on the Blade
Adapter. Align the markings on
the Disc with the markings on the
Blade Adapter, so that the lines
connect. If the Disc appears to
be in the lower position, remove
the Disc and rotate until the
markings line up and the Disc sits
in the higher position.
3 Place the Work Bowl onto the
unplugged Motor Base. Twist
clockwise. The Work Bowl will
click when locked into place.