• Keep small children away from mill at
all times.
• Avoid contact with moving parts on
the mill.
• Keep mill and power cord away from
stove or other heat sources.
• The use of attachments not sold by or
recommended by the manufacturer
may cause fire, electrical shock or
other injury.
TURN OFF mill before unplugging from
or plugging into an electrical outlet.
• Be sure to turn switch to off position
after every use. Make sure motor stops
completely before disassembling.
• Mill should be unplugged from
electrical outlet before cleaning,
before assembling or disassembling
and when not in use.
• To prevent hazardous operation or
electric shock, DO NOT put motor base
or power cord in water or other liquids.
• DO NOT use outdoors.
Important Safeguards
HOUSEHOLD USE ONLY
Please read all of these instructions thoroughly�
• DO NOT unplug from electrical outlet
by pulling on the cord. To unplug,
grasp the plug and pull.
• DO NOT put your fingers or other
foreign objects into any of the mill’s
openings while it is in operation.
• DO NOT leave mill unattended while
in use.
• DO NOT let cord hang over the edge of
a table or counter or touch hot surfaces.
• DO NOT place on or near a hot gas or
electric burner or in a heated oven.
• DO NOT clean mill by inserting
pointed objects into milling chamber,
or using running water.
DO NOT OPERATE: with a damaged
cord or plug, after any appliance
malfunction, is dropped, or damaged
in any manner. Return appliance to
nearest authorized service facility
for a thorough examination, and
any needed repairs, or electrical or
mechanical adjustments.
2
To Next Page
Loading...
Need help?
General
