8
4. SYMBOLS
Symbol in the operating instructions:
Attention, general hazard area.
This symbol refers to safety relevant warnings and indicates possibly dangerous
situations.
The non-adherence to these warnings can lead to material damage and injury to
personal.
Symbol in the operating instructions:
This symbol refers to important circumstances.
5. INSTALLATION
5.1. ENVIRONMENTAL CONDITIONS
The water bath is designed to operate safely under the following conditions:
Indoor use only
Ambient temperature: 5°C to 40°C.
Maximum relative humidity for temperature up to 22°C: 80%.
Maximum altitude: 2000 m.
Temperature for maximum performance: 15°C / 25°C.
5.2. HANDLING AND TRANSPORTATION
All handling and transportation must be carried out by using proper equipment and experienced
staff. The instrument must be supported underneath and never be turned upside down.