What to do if my NuWave Fryer is not turning on?
If your NuWave Brio Healthy Digital 6-Qt. Air Fryer isn't turning on, first ensure it's properly plugged into a grounded power socket. Then, press the "ON/OFF" button after selecting your settings. Finally, make sure the Fry Pan Basket is correctly placed inside the air fryer.
How to make french fries crispy in NuWave Brio 37001 120V Fryer?
If your French fries from the NuWave Brio Healthy Digital 6-Qt. Air Fryer aren't crispy, it's likely due to the amount of oil and water present in the fries. Ensure you thoroughly dry the potato sticks before adding oil. For a crispier result, cut the potato sticks smaller and dry them well. You might also consider adding slightly more oil before placing them back in the fryer.
How to make snacks crispy in NuWave Fryer?
If your fried snacks aren't crispy when they come out of the NuWave Brio Healthy Digital 6-Qt. Air Fryer, it might be because you're using snacks meant for a traditional deep fryer. Try using snacks designed to be baked in a traditional oven. Alternatively, lightly brush some olive oil onto the snacks before placing them in the Brio for a crispier result.
Why are my french fries unevenly fried in NuWave Fryer?
If your French fries are fried unevenly in the NuWave Brio Healthy Digital 6-Qt. Air Fryer, it could be because you didn't soak the potato sticks properly before frying them. Soak potato sticks in a bowl of water for at least 30 minutes, then take them out and dry them with paper towels. Also, ensure you're using the right type of fresh potatoes that stay firm during air-frying.
Why is my NuWave Brio 37001 120V not cooking food completely?
If the ingredients in your NuWave Brio Healthy Digital 6-Qt. Air Fryer are not cooking completely, it could be due to several reasons. You may have put too many ingredients in the Fry Pan Basket, so try removing some. The cooking temperature might be too low, so increase it. Alternatively, the cooking time might be too short, so set the fryer to cook for a longer duration.
Why is white smoke coming out of my NuWave Brio 37001 120V?
If white smoke is coming from your NuWave product, it's likely because you are frying greasy foods or the Fry Pan Basket Net contains greasy residue from previous uses. Make sure to clean the Fry Pan Basket properly after each use.
What to do if I cannot slide the basket into my NuWave Fryer?
If you're having trouble sliding the Fry Pan Basket into your appliance, it's likely because the basket is overfilled. Do not fill the Fry Pan Basket more than 4/5 full. Also, make sure the Fry Pan Basket is correctly placed in the Base Tray; push it down until you hear a click.
Essential safety rules for appliance use.
Details on cord safety and electrical requirements.
Steps for initial cleaning and setup.
How to turn on/off, adjust wattage, and use start/pause.
Explains pre-heat, menus, temperature, and time settings.
Solutions for common operational issues.
Explains what is covered and excluded.
To Next Page
General
