23
23
Note: Functions that have already ended in the cooking
cycle cannot be edited or added during cooking.
• When cooking has nished, the unit will beep 3 times
and the display will show End followed by SAVE.
• Press the PROG button. The display will show prog
and 101.
• Use the START/PAUSE dial to nd the program
number to save your edits to.
• Press the PROG button again to save and store the
edits for later recall.
Note: If any recipe is saved into a program (memory slot)
that is already lled, the new recipe with set temperatures
and times will override the previous program recipe (101-180
only). Preset temperatures and times for program recipes
1-100 can be adjusted. Adjusted temps and times will not be
saved when a program number (1-100) is recalled once again.
CANCEL
Press the CANCEL button at any time to cancel and end all
operation of the Duet. Once CANCEL is pressed the display
will show --:--, this is standby mode.
To Next Page
Loading...
