NuWave Duet - Advanced Sear and Warm Functions

nuwavenow.com
29
ENGLISH
nuwavenow.com
29
SEAR
Sear 1 will always be directly BEFORE regular stage
cooking and Sear 2 will always be directly AFTER regular
stage cooking.
Sear 1
Default sear 1 temperature is 400˚F and default sear 1
time is 5 minutes (00:05).
1. Adjust your cooking temperatures and times for
stage cooking.
2. Press the SEAR button one (1) time. This will engage
the Sear 1 function. The display will show air fry, 400F,
sear, 1 (ashing), and temp.
• Sear 1 searing temperature can be adjusted
by turning the START/PAUSE dial. 400˚F is the
maximum searing temperature.
• Press the TIME button and use the START/PAUSE
dial to adjust the sear 1 searing time up to 5 minutes
(00:05).
3. Press the START/PAUSE button to begin cooking.
The display will show sear 1 (ashing), time, and the set
sear time (00:05 default) with the “:” ashing.
4. Once the Sear 1 cycle is complete the unit will
automatically go into stage (regular) cooking.
5. When the unit is nished cooking the display will show
End and the unit will beep 3 times.
Sear 1 & 2
Sear 1 & 2 is used to sear before and after regular
stage cooking.
1. Adjust your cooking temperatures and times for
stage cooking.
2. Press the SEAR button one time and set your sear 1
temperature and time. Default is 400˚F for 5 minutes.
Press the SEAR button again. The display will show 400F,
sear, 1, 2 (ashing), and temp.
3. Adjust the sear 2 temperature and time. Default is 400F
for 5 minutes.
4. Press the START/PAUSE button to begin cooking.
The display will show sear 1 (ashing), 2, time, and the
set sear 1 time with the “:” ashing.