To Next Page
J
jonesstaceyAug 14, 2025
What does it mean if my NuWave Kitchen Appliances pressure cooker displays the E1 error code?
- PParker BrownAug 14, 2025
The E1 error code on your NuWave pressure cooker indicates that the sensor circuit is broken.
What does it mean if my NuWave Kitchen Appliances pressure cooker displays the E1 error code?
The E1 error code on your NuWave pressure cooker indicates that the sensor circuit is broken.
What to do if I have difficulty opening the lid of my NuWave Electric Pressure Cooker?
If you're having trouble opening the lid of your NuWave Electric Pressure Cooker, it might still be under pressure. Check if the Floater Valve or Pressure Indicator is still up, indicating remaining pressure. If either is up, turn the Pressure Release Switch to "Release" to allow all remaining hot steam to escape.
What does it mean if my NuWave Kitchen Appliances pressure cooker displays the E4 error code?
If your NuWave pressure cooker displays the E4 error code, it means the signal switch is broken.
What does it mean if my NuWave Kitchen Appliances pressure cooker displays the E2 error code?
The E2 error code on your NuWave pressure cooker indicates a circuit short.
Why is my NuWave Electric Pressure Cooker not building up pressure?
If your NuWave Electric Pressure Cooker isn't building pressure, the lid might not be properly locked. Remove the lid and try again, ensuring you hold the lid, lower it, and turn it counterclockwise to lock. The LED panel should light up, indicating that the Sure Lock™ Safety Feature is activated, after which pressure should start building.
Why is gas leaking from the lid of my NuWave Electric Pressure Cooker?
If gas is leaking from the lid of your NuWave Electric Pressure Cooker, some ingredients may be stuck to the Silicone Gasket, or the gasket itself may be broken. Try cleaning the Silicone Gasket and ensuring the lid is closed properly.
What to do if gas is leaking from the Floater Valve of my NuWave Electric Pressure Cooker?
If gas is leaking from the Floater Valve of your NuWave Electric Pressure Cooker, some ingredients may be stuck to the Floater Valve’s sealing circle, or the sealing circle may be broken. Clean the Anti-Clog Filter. Also, the Floater Valve’s sealing circle may need to be replaced.
Why doesn't the Floater Valve raise up on my NuWave Electric Pressure Cooker?
If the Floater Valve isn't raising up on your NuWave Electric Pressure Cooker, there might not be enough ingredients or water to generate sufficient pressure, or there could be gas leaking from the lid or Pressure Release Valve. Ensure ingredients or water are at the minimum level.
How to fix difficulty closing the lid on my NuWave Electric Pressure Cooker?
If you're having difficulty closing the lid of your NuWave Electric Pressure Cooker, the Silicone Gasket may not be placed correctly, or the Floater Valve may be blocking the push rod. Ensure the Silicone Gasket is correctly placed and push the Floater Valve into the correct position.
Instructions for removing and installing the silicone gasket.
Overview and functions of the main display interface.
Function to change food consistency using 'less', 'normal', 'more'.
Function to delay the cooking start time.
Manually adjust time to keep food warm.
Recommendations for safe and successful canning.
Step-by-step guide for using the cooker for canning.
Instructions on how to get warranty service.
General| Capacity | 13 quarts |
|---|---|
| Power | 1500 watts |
| Material | Stainless steel |
| Control Type | Digital |
| Cooking Functions | Pressure cook, slow cook, sauté, steam |
| Safety Features | Pressure release valve, and overheat protection |
| Pressure Settings | High and low pressure |
| Cooking Programs | Preset Cooking Programs |
