11
Owner’s Manual
CARE & MAINTENANCE
• Unplug the NuWave Nutri-Pot
®
Digital Pressure Cooker and let it cool
before cleaning.
• Wipe the Base and inside of the Base, if necessary, with a clean cloth.
Do not immerse the Base in water or spray any water in it.
• Remove and clean the Water Collection Box. Wipe with a wet cloth
and return to the pressure cooker.
• The Lid can be detached from the Base. All parts inside the Lid can be
hand-washed separately with water and should always be checked to
make sure they are not damaged or cracked.
• Use a sponge or non-metallic soft brush to clean the Inner Pot, then
wipe the surface with a clean cloth.
SILICONE GASKET INSTALLATION
MAKE SURE THE SILICONE GASKET HAS NO CRACKS OR IS IN
ANYWAY DAMAGED.
Removing the Silicone Gasket
• Open the Lid.
• With one hand holding the inner Lid down, gently pull the Silicone Gasket up.
Installing the Silicone Gasket
• Line up the Silicone Gasket on top of the metal ring.
• Gently push the Silicone Gasket down, making sure the metal ring is inside
the Silicone Gasket’s groove.
CARE & MAINTENANCE
To Next Page
Loading...
