Need help?Do you have a question about the nvent RAYCHEM BTV and is the answer not in the manual?
Covers fire and shock hazards, proper installation, component integrity, and material usage.
Covers paying out, positioning, securing cable, and attachment tape types.
Explains the requirement for ground-fault protection and lists suitable breakers.
Introduces tests performed during commissioning and for preventive maintenance.
Details the procedure to determine the power output of Self-Regulating and Power-Limiting cables.
Explains methods for finding faults: ratio, 1/R, and capacitance tests.
Covers fire and shock hazards, proper installation, component integrity, and material usage.
Covers paying out, positioning, securing cable, and attachment tape types.
Explains the requirement for ground-fault protection and lists suitable breakers.
Introduces tests performed during commissioning and for preventive maintenance.
Details the procedure to determine the power output of Self-Regulating and Power-Limiting cables.
Explains methods for finding faults: ratio, 1/R, and capacitance tests.
General| Product Type | Self-Regulating Heating Cable |
|---|---|
| Maximum Maintain Temperature | 150°F (65°C) |
| Minimum Installation Temperature | -40°F (-40°C) |
| Application | Freeze Protection, Temperature Maintenance |
| Bend Radius | 25mm (1 inch) minimum |
| Voltage | 120V, 240V |
| Cable Diameter | 0.47 in (11.9 mm) |
| Outer Jacket Material | Fluoropolymer or Polyolefin |
| Jacket Material | Fluoropolymer or Polyolefin |
To Next Page
