Need help?Do you have a question about the nvent Raychem NRG-Temp and is the answer not in the manual?
General| Mounting | Surface |
|---|---|
| Switching current | 16 A |
| Control type | On/Off |
| Frost protection | Yes |
| Color | White |
| Display | LCD |
| Output | Relay |
| Enclosure Rating | IP20 |
| Sensing Element | NTC |
| Accuracy | ±0.5°C |
| Temperature Range | 5°C to 40°C |
Instructions for flush mounting the NRG-Temp thermostat in a standard wall box.
Guidance on installing the floor sensor in a flexible conduit for optimal performance.
Details on connecting the thermostat to the 230VAC power supply, including circuit diagrams.
Information specific to using the NRG-Temp with T2QuickNet heating mats and T2Red cables.
Defines the desired temperature for user presence.
Defines the desired temperature for user absence.
Manages temperature based on presence or schedule. Covers Comfort and Economic programme behaviour.
Temporarily deviates from Comfort temperature by +5°C for 2 hours.
Allows setting the current time and day on the thermostat.
Allows scrolling through different programmes like Co, EcoH, EcoO, and OFF.
Details standard user menus for sensor settings, calibration, display duration, temperature set points, and service read out.
Covers advanced installer menus for adaptive functions, first warming, running time, hysteresis, delayed start-up, frost protection, regulation, and setback offset.
Explains the self-calibration process in room sensing mode.
Describes how to lock and unlock the thermostat keys.
Details controlling the thermostat via an external device using a single wire.
To Next Page
