Nvidia ConnectX-6 Lx - Page 27

NVIDIA ConnectX-6 Lx Ethernet Adapter Cards for OCP Spec 3.0 User Manual 26
Internal Lock Bracket Pull-tab Bracket Ejector-Latch Bracket
2. Ensure that the insulator's front edge is beneath the bracket, as shown in the below
figure.
3. Screw on the OCP 3.0 bracket with the supplied screws that came with the new
bracket kit. Use the specified torx tool type and apply the specified torque on the
screws per bracket form factor.
Internal
Lock
Bracket
Pull-tab
Bracket
Ejector-Latch Bracket
Note that one screw is flat-head 90° screw and the
other is socket-head screw. Screw on the different
types of screws as shown in the below illustration.
Important
Do not force the bracket onto the adapter card.