Nvidia ConnectX-6 - Page 21

21
• LED 3 and 4: Reserved for future use.
LED1 and LED2 Link Status Indications- Ethernet Protocol:
LED Color and State Description
Off A link has not been established
Beacon command for locating the adapter card 1Hz blinking Yellow
Error
4Hz blinking Yellow Indicates an error with the link. The
error can be one of the following:
Error Type Description LED Behavior
I
2
C
I
2
C access to the
networking ports
fails
Blinks until error
is fixed
Over-current
Over-current
condition of the
networking ports
Blinks until error
is fixed
Solid green Indicates a valid link with no active traffic
Blinking green Indicates a valid link with active traffic
LED1 and LED2Link Status Indications- InfiniBand Protocol:
LED Color and State Description
Off A link has not been established
Beacon command for locating the adapter card 1Hz blinking Yellow