Need help?Do you have a question about the Nvidia Mellanox ConnectX-6 Dx Series and is the answer not in the manual?
General| Network Interface | Ethernet |
|---|---|
| PCIe Interface | PCIe 4.0 x16 |
| Virtualization Support | SR-IOV, VirtIO |
| Product Type | Network Adapter |
| Data Link Protocol | Ethernet |
| RDMA Support | Yes |
| iWARP Support | No |
| Operating Temperature | 0°C to 55°C |
| Port Speed | 25/50/100 Gbps |
| Form Factor | PCIe |
| Number of Ports | 1 or 2 |
| Hardware Offloads | VXLAN, NVGRE, Geneve |
| Security Features | IPsec, TLS |
| Speed per Port | 10/25/40/50/100 Gbps |
| Ethernet Standards | IEEE 802.3 |
| RoCE Support | RoCEv2 |
Provides safety warnings for installation.
Outlines the steps for installing the adapter card.
Covers prerequisites, downloading, installing, results, logs, and driver loading for Linux.
Covers software requirements, downloading, and installing Mellanox WinOF-2 for Windows.
Covers hardware/software requirements and installation of Mellanox NATIVE ESXi drivers.
Lists hardware requirements for installation.
Lists software requirements for installation.
Lists checks before installing the card.
Step 1: Locate slot and insert card.
Step 2: Insert card into slot.
Step 1: Secure bracket to chassis.
Precautions before uninstalling the adapter card.
Steps to remove the adapter card from the system.
Steps to set up a YUM repository.
How to update the device firmware using the command line.
Steps for manually updating the device firmware.
How to enable automatic firmware updates on boot.
Steps to add Mellanox public key for Secure Boot.
Steps to uninstall MLNX_WinOF2 on a single node.
Steps to uninstall MLNX_WinOF2 in unattended mode.
Lists requirements for VMware driver installation.
To Next Page