Nvidia Mellanox ConnectX-6 Dx Series - Scheme 1: One Bi-Color LED; Scheme 3: One Bi-Color LED and One Single Color LED

To Next Page

To Previous Page

OPN LEDs Scheme

MCX621102AC-ADAT, MCX621102AN-ADAT,

MCX621102AE-ADAT

Scheme 1: One Bi-Color LED

MCX623102A[C/N]-ADAT, MCX623102A[C/N]-

GDAT,MCX623102A[S/E/N/C]-GDAT

MCX623105A[N/E]-CDAT,MCX623106A[C/N/S/E]-

CDAT,MCX623106P[C/N/E]-CDAT,

MCX623105A[C/N/S/E]-VDAT

Scheme 3: One Bi-Color LED and one Single Color

LED

Scheme 1: One Bi-Color LED

There is one bicolor(Yellow and Green) I/O LED per port to indicate speed and link status.

Physical and Logical Link Indications

State Bi-Color LED (Yellow/Green)

Physical link speed

Beacon command for locating the adapter card 1Hz blinking Yellow

Error 4Hz blinking Yellow indicates a problem with the link

Physical Activity • A constant Green indicates a physical link with the

maximum networking speed.

• A constant Yellow indicates a physical link with less than

the maximum networking speed.

Link Up • A constant Green indicates a physical link with

themaximum networking speed.

• A constant Yellow indicates a physical link with less than

the maximum networking speed.

Scheme 3: One Bi-Color LED and one Single Color LED

There are two I/O LEDs per port to indicate speed and link status. LED1 is a bicolor LED (Yellow and

green) and LED2 is a single color LED (green).

Physical and Logical Link Indications (Ethernet Mode)

State Bi-Color LED (Yellow/Green)

Physical link speed

Single Color LED (Green)

Logical link/activity

Beacon command for locating the

adapter card

1Hz blinking Yellow OFF

Error 4Hz blinking Yellow indicates a problem

with the link