Nvidia Mellanox ConnectX-6 Dx Series - MCX623102 A[C;N]-ADAT Specifications

58
MCX623102A[C/N]-ADATSpecifications
Physical Size: 5.59in. x 2.71in (142.00mm x 68.90mm)
Connector: Dual SFP56 Ethernet (copper and optical)
Protocol
Support
Data Rate: Ethernet 1/10/25 Gb/s
Ethernet: 25GBASE-R, 20GBASE-KR2, 10GBASE-LR,10GBASE-ER, 10GBASE-CX4, 10GBASE-
CR, 10GBASE-KR, SGMII, 1000BASE-CX, 1000BASE-KX, 10GBASE-SR
PCI Express Gen 3.0/4.0: SERDES @ 16.0GT/s, 16 lanes (2.0 and 1.1 compatible)
Power
Specifications
(a)
Voltage: 12V
Power Cable Type PCIe Gen 3.0 PCIe Gen 4.0
Typical Power
(b)
Passive Cables 14.87W 15.68W
Maximum Power Passive Cables 18.92W 19.74W
Maximum power available through SFP56 port:2.5W (each port)
Voltage: 3.3Aux
Maximum current: 100mA
Environmenta
l
Temperature
Operational 0°C to 55°C
Non-operational -40°C to 70°C
Humidity
90% relative humidity
(c)
Altitude (Operational) 3050m
Airflow Requirements @ 55C
(d)(e)
Cable Type Hot Aisle - Heatsink to Port
Passive Cable 300LFM
Active 0.8 Cable 400LFM
Active 2.5W Cable 500LFM
Regulatory
Safety CB / cTUVus / CE
EMC CE / FCC / VCCI / ICES / RCM
RoHS RoHS compliant
a.Power numbers are provided for passive cables only. For board power numbers while using active
cables, please add the outcome of the following formula to the passive cables power numbers stated
above: Active_Module_Power xN umber_of_Modules x1.1 (efficiency factor)
b. Typical power for ATIS traffic load.
c. For both operational and non-operational states.
d. Airflow is measured in wind tunnel.
e.Contact Mellanox for airflow numbers with other active modules' power levels.