Hardware Installation
Installation and initialization of ConnectX-6 Dx adapter cards require attention to the mechanical
attributes, power specification, and precautions for electronic equipment.
Safety Warnings
Please observe all safety warnings to avoidinjury and prevent damage to system components. Note
that not all warnings are relevant to all models.
Unable to render include or excerpt-include. Could not retrieve page.
Installation Procedure Overview
The installation procedure of ConnectX-6 Dx adapter cards involves the following steps:
Step Procedure Direct Link
1 Check the system’s hardware and software
requirements.
Refer to System Requirements
2 Pay attention to the airflow consideration within the
host system
Refer to Airflow Requirements
3 Follow the safety precautions Refer to Safety Precautions
4 Unpack the package Refer to Unpack the package
5 Follow the pre-installation checklist Refer to Pre-Installation Checklist
6 (Optional) Replace the full-height mounting bracket
with the supplied short bracket
Refer to Bracket Replacement
Instructions
7 Install the ConnectX-6 Dx and PCIe Auxiliary
connection cards in the system
Refer to Installation Instructions
8 Connect cables or modules to the card Refer to Cables and Modules
9 Identify ConnectX-6 Dx in the system Refer to Identifying Your Card
Safety warnings are provided here in the English language. For safety warnings in other
languages, refer to the Adapter Installation Safety Instructions document available on
mellanox.com.
To Next Page
Loading...