1.
2.
3.
1.
2.
3.
4.
Uninstalling the Card
Safety Precautions
The adapter is installed in a system that operates with voltages that can be lethal. Before uninstalling
the adapter card, please observe the following precautions to avoid injury and prevent damage to
system components.
Remove any metallic objects from your hands and wrists.
It is strongly recommended to use an ESD strap or other antistatic devices.
Turn off the system and disconnect the power cord from the server.
Card Removal
Verify that the system is powered off and unplugged.
Wait 30 seconds.
To remove the card, disengage the retention mechanisms on the bracket (clips or screws).
Holding the adapter card from its center, gently pull the ConnectX-6 and Auxiliary Connections
cards out of the PCI Express slot.
Please note that the following images are for illustration purposes only.
The installation instructions include steps that involve a retention clip to be used while
connecting the Cabline harnesses to the cards. Please note that this is an optional accessory.
To Next Page
Loading...