Nvidia ConnectX-6 - MCX654106 A-HCAT Specifications

91
Airflow (LFM) /
Ambient
Temperature
Cable Type
Airflow Direction
Heatsink to Port Port
to
Heats
ink
Passive Cables 600 LFM / 55°C 350
LFM /
35°C
NVIDIAActive 4.7W Cables
600 LFM / 55°C
d
350
LFM /
35°C
Regulatory
Safety: CB / cTUVus / CE
EMC: CE / FCC / VCCI / ICES / RCM / KC
RoHS: RoHS Compliant
Notes: a.The ConnectX-6 adapters supplement the IBTA auto-negotiation specification to get better
bit error rates and longer cable reaches. This supplemental feature only initiates when connected to
anotherNVIDIA InfiniBand product.
b.Typical power for ATIS traffic load.
c. For both operational and non-operational states.
d. For engineering samples - add 250LFM
MCX654106A-HCAT Specifications
Physical
Low Profile Adapter Card Size: 6.6 in. x 2.71 in. (167.65mm x 68.90mm)
Auxiliary PCIe Connection Card Size: 5.09 in. x 2.32 in. (129.30mm x 59.00mm)
Two Cabline CA-II Plus harnesses (white and black) Length: 35cm
Connector: Dual QSFP56 InfiniBand and Ethernet (copper and optical)
Please make sure to install the ConnectX-6 card in a PCIe slot that is capable of supplying
the required power and airflow as stated inthe below table.

For power specifications when using a single-port configuration, please refer to
MCX654105A-HCAT Specifications
