Nvidia ConnectX-6 - Installing NVIDIA NATIVE Esxi Driver for Vmware Vsphere; Removing Earlier NVIDIA Drivers

73
1.
2.
3.
4.
1.
2.
3.
Requirement Description
Installer Privileges The installation requires administrator privileges on the target
machine.
InstallingNVIDIA NATIVE ESXi Driver for VMware vSphere
To install the driver:
Log into the ESXi server with root permissions.
Install the driver.
#>esxclisoftwarevibinstall–d<path>/<bundle_file>
Example:
#> esxcli software vib install -d /tmp/MLNX-NATIVE-ESX-ConnectX-4-5_4.16.8.8-10EM-650.0.0.4240417.zipesxcli
Reboot the machine.
Verify the driver was installed successfully.
esxcli software vib list | grep nmlx
nmlx5-core 4.16.8.8-1OEM.650.0.0.4240417 MEL PartnerSupported 2017-01-31
nmlx5-rdma 4.16.8.8-1OEM.650.0.0.4240417 MEL PartnerSupported 2017-01-31
Removing EarlierNVIDIA Drivers
To remove all the drivers:
Log into the ESXi server with root permissions.
List all the existing NATIVE ESXi driver modules. (See Step 4 in Installing NVIDIA NATIVE ESXi
Driver for VMware vSphere.)
Remove each module:
#> esxcli software vib remove -n nmlx5-rdma
#> esxcli software vib remove -n nmlx5-core
Please uninstall all previousNVIDIA driver packages prior to installing the new version. See
Removing Earlier NVIDIA Drivers for further information.

After the installation process, all kernel modules are loaded automatically upon boot.

Please unload the previously installed drivers before removing them.
