Nvidia ConnectX-6 - MCX654105 A-HCAT Specifications

89
Maximum power available through QSFP56 port: 5W
Enviro
nment
al
Temperature Operational 0°C to 55°C
Non-operational -40°C to 70°C
Humidity: 90% relative humidity
c
Airflow (LFM) /
Ambient
Temperature
Cable Type
Airflow Direction
Heatsink to Port Port
to
Heats
ink
Passive Cables 350 LFM / 55°C 250
LFM /
35°C
NVIDIAActive 2.7W Cables 550 LFM / 55°C 250
LFM /
35°C
Regula
tory
Safety: CB / cTUVus / CE
EMC: CE / FCC / VCCI / ICES / RCM / KC
RoHS: RoHS Compliant
Notes: a.The ConnectX-6 adapters supplement the IBTA auto-negotiation specification to get better
bit error rates and longer cable reaches. This supplemental feature only initiates when connected to
anotherNVIDIA InfiniBand product.
b.Typical power for ATIS traffic load.
c. For both operational and non-operational states.
MCX654105A-HCAT Specifications
Physical
Adapter Card Size: 6.6 in. x 2.71 in. (167.65mm x 68.90mm)
Auxiliary PCIe Connection Card Size: 5.09 in. x 2.32 in. (129.30mm x 59.00mm)
Two Cabline CA-II Plus harnesses (white and black) Length: 35cm
Please make sure to install the ConnectX-6 card in a PCIe slot that is capable of supplying
the required power and airflow as stated inthe below table.
