Nvidia ConnectX-6 - Page 92

92
Protocol
Support
InfiniBand: IBTA v1.4
a
Auto-Negotiation: 1X/2X/4X SDR (2.5Gb/s per lane), DDR (5Gb/s per lane), QDR (10Gb/s per
lane), FDR10 (10.3125Gb/s per lane), FDR (14.0625Gb/s per lane), EDR (25Gb/s per lane) port,
HDR100 (2 lane x 50Gb/s per lane), HDR (50Gb/s per lane) port
Ethernet: 200GBASE-CR4, 200GBASE-KR4, 200GBASE-SR4, 100GBAConnectX-6SE-CR4,
100GBASE-KR4, 100GBASE-SR4, 50GBASE-R2, 50GBASE-R4, 40GBASE-CR4, 40GBASE-KR4,
40GBASE-SR4, 40GBASE-LR4, 40GBASE-ER4, 40GBASE-R2, 25GBASE-R, 20GBASE-KR2, 10GBASE-
LR,10GBASE-ER, 10GBASE-CX4, 10GBASE-CR, 10GBASE-KR, SGMII, 1000BASE-CX, 1000BASE-KX,
10GBASE-SR
Data Rate InfiniBand SDR/DDR/QDR/FDR/EDR/
HDR100/HDR
Ethernet 1/10/25/40/50/100/200 Gb/s
Gen3: SERDES @ 8.0GT/s, x16 lanes (2.0 and 1.1 compatible)
Adapter
Card
Power
Voltage: 12V, 3.3VAUX
Power Cable
Typical Power
b
Passive Cables 31.4W
Maximum Power Please refer to ConnectX-6 VPI Power Specifications (requires
NVONline login credentials)
Voltage: 3.3Aux
Maximum current:100mA
Maximum power available through QSFP56 port: 5W
Active
Auxiliary
PCIe
Connectio
n Card
Power
Typical Power 3.0W
Maximum Power 4.0W
Environme
ntal
Temperature
Operational 0°C to 55°C
Non-operational -40°C to 70°C
Humidity: 90% relative humidityc