Protoc
ol
Suppo
rt
InfiniBand: IBTA v1.4
a
HDR (4 lanes x 50Gb/s per lane) , HDR100 (2 lane x 50Gb/s per lane), EDR (4 lanes x 25Gb/s per
lane), FDR (4 lanes x 14.0625Gb/s), 1X/2X/4X SDR (4 lanes x 2.5Gb/s per lane).
Data Rate InfiniBand HDR/HDR100/EDR/FDR/SDR
Gen3/4: SERDES @ 8.0GT/s/16GT/s, x16 lanes
Adapt
er
Card
Power
Voltage: 12V, 3.3VAUX
Power Cable
Typical Power Passive Cables 19.58W
Maximum Power Please refer to ConnectX-6 VPI Power Specifications (requires NVONline
login credentials)
Voltage: 3.3Aux
Maximum current:100mA
Maximum power available through QSFP port: 5W
Enviro
nment
al
Temperature Operational 0°C to 55°C
Non-operational -40°C to 70°C
Humidity: 90% relative humidity
Airflow (LFM) /
Ambient
Temperature
Cable Type
Airflow Direction
Heatsink to Port Port
to
Heat
sink
Passive Cables TBD TBD
NVIDIAActive 2.75W Cables TBD TBD
Regula
tory
Safety: CB / cTUVus / CE
EMC: CE / FCC / VCCI / ICES / RCM / KC
RoHS: RoHS Compliant
Notes: a. The ConnectX-6 adapters supplement the IBTA auto-negotiation specification to get better
bit error rates and longer cable reaches. This supplemental feature only initiates when connected to
To Next Page
Loading...
